Refereed Papers
- Pandit, S.M. and Wu, S.M., "Characterization of Abrasive Tools by
Continuous Time
Series," Transactions ASME, Jour. of Eng. for Industry, Vol. 95, Series
B, No. 3, Aug.
1973, pp. 821-826.
- Pandit, S.M. and Wu, S.M., "Exponential Smoothing as a
Special Case of a Linear
Stochastic System," Operations Research, Vol. 22, July-Aug. 1974, No. 4,
pp. 868-879.
- Pandit, S.M., Subramanian, T.L. and Wu, S.M., "Modeling
Machine Tool Chatter by Time-
Series," Transactions ASME, Jour. of Eng. for Industry, Vol. 97B, Feb.
1975, pp. 211-215.
- Pandit, S.M., Subramanian, T.L. and Wu, S.M., "Stability
of Random Vibrations with
Special Reference to Machine-ToolChatter," Transactions ASME, Jour. of
Eng. for
Industry, Vol. 97B, 1975, pp. 216-219.
- Pandit, S.M. and Wu, S.M., "Unique Estimates of the
Parameters of a Continuous
Stationary Stochastic Process," Biometrika, Vol. 62, 1975, No. 2, pp.
497-501.
- Burney, F.A., Pandit, S.M. and Wu, S.M., "A Stochastic
Approach to Characterization of
Machine Tool System Dynamics Under Actual Working Conditions,"
Transactions ASME,
Jour. of Eng. for Ind., Vol. 98B, 1976, pp. 614-619.
- Pandit, S.M., Goh, T.N. and Wu, S.M., "Modeling of System
Dynamics and Disturbance
from Paper-Making Process Data," Transactions ASME, Jour. of Dynamic
Systems,
Measurement and Control, Vol. 98G, June 1976, pp. 197-199.
- Pandit, S.M., Suratkar, P.T. and Wu, S.M., "Mathematical
Model of a Ground Surface
Profile with the Grinding Process as a Feedback System," Wear, Vol. 39,
1976, pp. 205-
217.
- Suratkar, P.T., Pandit, S.M. and Wu, S.M., "A Stochastic
Approach to the Mode of
Deformation and Contact Between Rough Surfaces," Wear, Vol. 39, 1976, pp.
239-250.
- Pandit, S.M., Nassirpour, F. and Wu, S.M., "Stochastic
Geometry of Anisotropic Random
Surfaces with Application to Coated Abrasives," Trans. ASME, Jour. of
Engineering for
Industry, Vol. 99B, 1977, pp. 218-224.
- . Burney, F.A., Pandit, S.M. and Wu, S.M., "A New Approach
to the Analysis of Machine
Tool System Stability Under Working Conditions," Trans. ASME, Jour. of
Engineering for
Industry, Vol. 99B, 1977, pp. 585-590.
- Pandit, S.M., "Analysis of Vibration Records by Data
Dependent Systems," Shock and
Vibration Bulletin, No. 47, Part 4, 1977, pp. 161-174.
- DeVries, W.R., Pandit, S.M. and Wu, S.M., "Evaluation of
the Stability of Paper Basis-
Weight Profiles Using Multivariate Time Series," IEEE Transactions on
Automatic
Control, Vol. AC-22, 1977, pp. 590-594.
- Pandit, S.M. and Wu, S.M., "Modeling and Analysis of
Closed Loop Systems from
Operating Data," Technometrics, Vol. 19, 1977, pp. 477-485.
- Pandit, S.M., "Stochastic Linearization by Data Dependent
Systems," Trans. ASME, Jour.
of Dynamic Systems, Measurement and Control, Vol. 99G, 1977, pp. 221-226.
- Steudel, H.J., Pandit, S.M. and Wu, S.M., "Mutliple Time
Series Approach to Modeling the
Manufacturing Job-Shop as a Network of Queues," Management Science, Vol.
24, 1977,
pp. 456-463.
- Pandit, S.M., "Data Dependent Systems Approach to
Stochastic Tool Life and Reliability,"
Trans. ASME, Jour. of Engineering for Industry, Vol. 100, 1978, pp. 318-322.
- Kapoor, S.G., Wu, S.M. and Pandit, S.M., "A New Method
for Evaluating Printing
Smoothness of Coated Papers," TAPPI, Vol. 61, No. 6, 1978, pp.72-74.
- Pandit, S.M. and Rajurkar, K.P., "A Mathematical Model
for Electro-Discharge Machined
Surface Roughness," Proc. North American Manufacturing Research
Conference VI, 1978,
pp. 339-345.
- Pandit, S.M. and Kahng, C.H., "Reliability and Life
Distribution of Ceramic Tools by Data
Dependent Systems," Annals of the CIRP Vol. 27, 1978, pp. 23-27.
- Steudel, H.J., Pandit, S.M. and Wu, S.M., "Interpretation
of Dispatching Policies on Queue
Behavior via Simulation and Time Series Analysis," AIIE Transactions,
Vol. 10, No. 3,
1978, pp. 292-297.
- Pandit, S.M., "Data Dependent Systems and Exponential
Smoothing," in Analyzing Time
Series, Ed. O.D. Anderson, North Holland, 1980, pp. 217-238.
- Pandit, S.M., Suzuki, H. and Kahng, C.H., "Application of
Data Dependent Systems to
Diagnostic Vibration Analysis," Transactions ASME, Journal of Mechanical
Design, Vol.
102, 1980, pp. 233-241.
- Pandit, S.M. and Rajurkar, K.P., "Crater Geometry and
Volume from Electro-Discharge
Machined Surface Profiles by Data Dependent Systems," Transactions ASME,
Jour. of
Eng. for Industry, Vol. 102B, 1980, pp. 289-295.
- Pandit, S.M. and Revach, S., "Wavelength Decomposition of
Surface Roughness in
Turning," Proc. North American Manufacturing Research Conference VIII,
1980, pp. 358-
365.
- Pandit, S.M., "Optimal Tool Replacement Strategies Based
on Wear Curves or Failure
Records," ASME Paper No. 79-WA/Prod-22.
- Pandit, S.M. and Sheikh, A.K., "Reliability and Optimal
Replacement via Coefficient of
Variation," Transactions ASME, Jour. of Mechanical Design, Vol. 102,
1980, pp. 761-768.
- Pandit, S.M. and Rajurkar, K.P., "Data Dependent Systems
Approach to EDM Process
Modeling from Surface Roughness Profiles," Annals of the CIRP, Vol. 29,
1980, pp. 107-
112.
- Sheikh, A.K., Kendall, L.A. and Pandit, S.M.,
"Probabalistic Opimization of Multitool
Machining Operations," Transactions ASME, Jour. of Eng. for Industry,
Vol. 102B, 1980,
pp. 239-246.
- Pandit, S.M. and Rajurkar, K.P., "Data Dependent Systems
Approach to Solar Energy
Simulation Inputs," Proc. ASME/SSEA Conference, Solar Engineering - 1981,
pp. 389-
398; also Transactions ASME, Jour. of Solar Energy Engineering, Vol. 105,
1983, pp. 461-
463.
- Pandit, S.M. and Sathyanarayanan, G., "A New Approach to
Wheel-Workpiece Interaction
in Surface Grinding," Proc. North American Manufacturing Research
Conference IX,
1981, pp. 275-282.
- Pandit, S.M. and Rajurkar, K.P., "Analysis of Electro
Discharge Machining of Cemented
Carbides," Annals of the CIRP, Vol. 30/1, 1981, pp. 111-116.
- Pandit, S.M., "Characteristic Shapes and Wavelength
Decomposition of Surfaces in
Machining,"Annals of the CIRP, Vol. 30/1, 1981, pp. 487-492.
- Pandit, S.M. and Revach, S., "Data Dependent Systems
Approach to Dynamics of Surface
Generation in Turning," Transactions ASME, Jour. of Eng. for Industry,
Vol. 103B, 1981,
pp. 437-445.
- Pandit, S.M., "Data Dependent Systems Approach to Trend
and Seasonality, Time Series
Analysis - Theory and Practice I - Ed. O.D. Anderson, North Holland,
1982, pp. 515-526.
- Pandit, S.M. and King, D.R., "Data Dependent Systems
Linearization of Nonlinear
Pendulums," ASME Paper No. 81-WA/DSC-6, 1981.
- Pandit, S.M. and Rajurkar, K.P., "A Stochastic Approach
to Thermal Modeling Applied to
Electro Discharge Machining," ASME Paper No. 81-WA/HT-3, 1981,
Transactions
ASME, Journal of Heat Transfer, Vol. 105, 1983, pp. 555-562.
- Pandit, S.M. and Balkuvar, A., "Frequency Decomposition
of Cutting Forces in End
Milling," Proc. North American Manufacturing Research Conferences X,
1982, pp. 393-
400.
- Rajurkar, K.P. and Pandit, S.M., "Prediction of Metal
Removal Rate and Surface
Roughness in Electrical Discharge Machining," Proc. North American
Manufacturing
Research Conference X, 1982, pp. 444-450.
- Pandit, S.M. and Kashou, S., "A Data Dependent Systems
Approach to On-Line Tool Wear
Sensing", Transactions ASME, Journal of Engineering for Industry, Vol.
104, 1982, pp.
217-223.
- Pandit, S.M. and Sathyanarayanan, G., "A Model for
Surface Grinding Based on Abrasive
Geometry and Elasticity", Transactions ASME, Journal of Engineering for
Industry, Vol.
104, 1982, pp. 349-357.
- Pandit, S.M. and Kashou, S., "Variation of Friction
Coefficient with Tool Wear", Wear,
Vol. 84, 1983, pp. 65-79.
- Rajurkar, K.P., Pandit, S.M. and Wittig, W.H., Pulse
Current Signal as a Sensor for On-
Line Computer Control of EDM," Proc. North American Manufacturing
Research
Conference XI, 1983, pp. 379-385.
- Pandit, S.M. and Wittig, W.H., "A Data Dependent Systems
Approach to Optimal
Microcomputer Control Illustrated by EDM," in Statistics in
Manufacturing, Ed. S. Kapoor
and M. Martinez, ASME Bk. No. H00289, pp. 83-88, 1983; also in
Transactions ASME,
Journal of Engineering For Industry, Vol. 106, 1984, pp. 137-142.
- Rajurkar, K.P. and Pandit, S.M., "Quantitative
Expressions for Some Aspects of Surface
Integrity of Electro Discharge Machined Components", Transactions ASME,
Journal of
Engineering For Industry, Vol. 106, 1984, pp. 171-177.
- Pandit, S.M. and Sathyanarayanan, G., "Decomposition of
Forces and Specific Energy in
Grinding", Proc. North American Manufacturing Research Conference XII,
1984, pp. 314-
321.
- Rajurkar, K.P., Pandit, S.M. and Venkatapathy, B.,
"Experimental and Theoretical
Investigation of EDM Debries", Proc. North American Manufacturing
Research
Conference XII, 1984, pp. 241-246.
- Pandit, S.M. and Sathyanarayanan, G. "Data Dependent
Systems Approach to Surface
Generation in Grinding," Transactions ASME, Journal of Engineering for
Industry, Vol.
106, 1984, pp. 205-212.
- Ambardar, A., Walworth, M., Pandit, S.M. and Ziegler,
R.F., "Echocardiogram Processing
and Classification Using Data-Dependent Systems Analysis", ISA
Transactions, Vol. 23,
No. 3, 1984, pp. 57-64.
- Rajurkar, K.P. and Pandit, S.M., "Adaptive Control of
EDM-Technology and Research",
1st International Material Removal Conference, Detroit, 1983, SME Paper
No. MR83-202,
also Manufacturing Engineering Transactions, 1985, pp. 8-14.
- Pandit, S.M., "Software Sensor Development by Data
Dependent Systems", Sensor
Technology and Untended Manufacturing Seminar, Schaumburg, (Chicago),
April 5-6,
1984, SME Paper No. MS84-925, also Manufacturing Engineering
Transactions, 1985, pp.
57-62.
- Pandit, S.M. and Lin, G. "Dynamometer and Machine Tool
Calibration by Impulse Test
Response", Proc. North American Manufacturing Research Conference XIII,
1985, pp.
272-276.
- Sathyanarayanan, G. and Pandit, S.M., "Fracture and
Attritious Wear Rates by Data
Dependent Systems", Proc. North American Manufacturing Research
Conference XIII,
1985, pp. 314-320.
- Pandit, S.M. and Mehta, N.P., "Data Dependent Systems
Approach to Modal Analysis, Via
State Space", Transactions ASME, Journal of Dynamic Systems, Measurement
and
Control, Vol. 107, 1985, pp. 132-137.
- Sathyanarayanan, G. and Pandit, S.M., "Work-Burn as a
Result of Metal Build-up,
Attritious Wear and Friction in Grinding", in Milton C. Shaw Grinding
Symposium, Ed. R.
Komanduri and D. Mass, The American Society of Mechanical Engineers, Bk.
#G00327,
1985, pp. 329-340.
- Pandit, S.M. and Mueller, T.M., "Microcomputer Control of
Electro Discharge Machining"
in Sensors and Controls for Manufacturing, Ed. E. Kannatey-Asibu, Jr.,
A.G. Ulsoy and R.
Komanduri, The American Society of Mechanical Engineers, Bk. #G00333,
1985, pp. 159-
165.
- Pandit, S.M. and Okafor, A.C., "Identification of
Receptances of Machine Tool Structures
Under Actual Working Conditions", Fourteenth North American Manufacturing
Research
Conference Proceedings, 1986, pp. 486-496.
- Pandit, S.M. and Sathyanarayan, G., "Prediction of
Surface Roughness and Wavelength
with Progress of Cut in Grinding," Wear, Vol. 108, 1986, pp. 81-95.
- Pandit, S.M. and Zhang, W., "Modeling Random Gyro Drift
Rate by Data Dependent
Systems", IEEE Transactions of Aerospace and Electronic Systems, AES-22,
No. 4, July
1986, pp. 455-459.
- Rajurkar, K.P. and Pandit, S.M. "Formation and Ejection
of EDM Debris", Transactions
ASME, Journal of Engineering for Industry, Vol. 108, 1986, pp. 22-26.
- Pandit, S.M. and Mueller, T.M., "Verification of On-Line
Computer Control of EDM by
Data Dependent Systems", Proc. Japan-U.S.A. Symposium on Flexible
Automation, Osaka,
Japan, July 14-18, 1986, pp. 819-822; Revised Version: Transactions ASME,
Journal of
Engineering for Industry, Vol. 109, 1987, pp. 117-121
- Okafor, A.C. and Pandit, S.M., "A Comparative Study of
Identification of Dynamic
Characteristics of the Headstock, Toolpost and Tailstock of a Lathe",
Proceedings 15th
North American Manufacturing Research Conference, 1987, pp. 565-572.
- Pandit, S.M. and Mehta, N.P., "Data Dependent Systems
Approach to Modal Analysis, Part
I: Theory," Journal of Sound and Vibration, Vol. 122, No. 3, 1988, pp.
413-422.
- Pandit, S.M. and Jacobson, E.N., "Data Dependent Systems
Approach to Modal Analysis,
Part II: Application to Structural Modification of a Disc-Brake Rotor,"
Journal of Sound
and Vibration, Vol. 122, No. 3, 1988, pp. 423-432.
- Pandit, S.M. and Weber, C.R., "Data Dependent Systems
Analysis of Machine Vision
Data", 16th North American Manufacturing Research Proceedings, 1988, pp.
414-420.
- Pandit, S.M. and Weber, C.R., "Digital Image
Decomposition by Data Dependent
Systems," Proceedings U.S.A.-Japan Symposium on Flexible Automation, Vol.
II, The
American Society of Mechanical Engineers, 1988, pp. 829-836, revised
version, Journal of
Engineering for Industry, Vol. 112, 1990, pp. 286-292.
- Rajurkar, K.P. and Pandit, S.M., "Recent Progress in
Electrical Discharge Machine
Technology and Research," Proc. Manufacturing International '88,
Symposium on Product
and Process Design, Vol. I, Ed. G. Chryssolouris and R. Komanduri,
American Society of
Mechanical Engineers, 1988, pp. 219-226.
- Mehta, N.P. and Pandit, S.M., "Modal Analysis of Multiple
Eigenvalue Systems by Data
Dependent Systems",Vibration Analysis - Techniques and Applications, T.S.
Sankar et. al.
eds., DE-Vol. 18-4, The American Society of Mechanical Engineers, Bk.
#H0508D, 1989,
pp. 311-320, revised and abridged version in ASME Journal of Vibration
and Acoustics,
Vol. 113, 1991, pp. 416-417.
- Pandit, S.M. and Shunmugam, M.S., "Signature of Machine
Tool Errors on Surface
Texture by DDS," Modeling of Machine Tools: Accuracy, Dynamics, and
Control, P.M.
Ferreira, S.G. Kapoor and A.C.-Y. Yang eds., American Society of
Mechanical Engineers,
1990, G00556, pp. 63-74, revised and abridged version in ASME Journal of
Engineering
for Industry, Vol. 114, 1992, pp. 370-374.
- Bekkala, A.H. and Pandit, S.M., "Implementation of Robust
Control on a Programmable
Logic Controller" Automation of Manufacturing Processes, Ed. K. Danai and
S. Malkin,
DSC-Vol. 22, The American Society of Mechanical Engineers, Bk. #G00541,
1990, pp.
115-122.
- Pandit, S.M. and Lin, G., "Data Dependent Systems
Methodology for Validation of
Simulation Models Illustrated by End-Milling", International Journal of
Production
Research, 1991, Vol. 29, No. 6, pp. 1251-1261
- Pandit, S.M., Yao, Y.X. and Hu, Z.Q., "Dynamic Properties
of Rigid Body and Supports
from Vibration Measurements", Structural Vibration and Acoustics, T.C.
Huang et al. eds.,
The American Society of Mechanical Engineers, 1991, DE-Vol. 34, pp. 185-190.
- Pandit, S.M. and Joshi, G.A., "Automated Inspection Using
Machine Vision: A Data
Dependent Systems Approach", Transactions of NAMRI/SME, Vol. XX, 1992,
pp. 269-
275.
- Pandit, S.M. and Joshi, G.A., "Intelligent Boundary
Detection: A Data Dependent Systems
Approach", Proc. Japan - USA Symposium on Flexible Automation, M. Leu
ed., The
American Society of Mechanical Engineers, 1992, Vol. 1, pp. 327-334.
- Pandit, S.M. and Joshi, G.A., "Image Enhancement: A Data
Dependent Systems
Approach", Sensors and Signal Processing for Manufacturing, S.Y. Liang
and C.L. Wu
eds., The American Society of Mechanical Engineers, 1992, PED-Vol. 55,
pp. 177-186,
revised version in ASME Journal of Engineering for Industry, Vol. 116,
1994, pp. 247-252.
- Joshi, G.A. and Pandit, S.M., "Optimal Quality Image
Acquisition" Transactions of
NAMRI/SME, Vol. XXI, 1993, pp. 311-318.
- Pandit, S.M. and Stacey, J.D., "Data Dependent Systems
Analysis of Acoustic Emission in
Grinding", Symposium on Manufacturing Science and Engineering, Ed. K.F.
Ehman, The
American Society of Mechanical Engineers, 1993, PED-Vol. 64, pp. 437-444.
- Pandit, S.M., Jordache, S. and Joshi, G.A., "Computer
Rigid Disk Surface Assessment with
Laser Interferometry Using DDS", Symposium on Manufacturing Science and
Engineering, Ed. K.F. Ehman, The American Society of Mechanical
Engineers, 1993,
PED-Vol. 64, pp. 13-21.
- Pandit, S.M., Joshi, G.A and Paul, D., "Bearing Defect
Detection Using DDS and Wavelet
Methods", Symposium on Mechatronics, Ed. T.-C. Tsao et. al., The American
Society of
Mechanical Engineers, 1993, PED-Vol. 63 (DSC-Vol. 50), pp. 285-293.
- Pandit, S.M., and Joshi, G.A., "Deterministic and
Stochastic Separation of Digital Images",
Journal of Visual Communication and Image Representation, Vol. 5, 1994,
pp. 52-61
- Pandit, S.M., and Hu, Z.-Q., "Determination of Rigid Body
Characteristics from Time
Domain Modal Test Data", Journal of Sound and Vibration, Vol. 177, 1994,
pp. 31-41.
- Yao, Y.-X., and Pandit, S.M., "Variance of Least Squares
Estimators for a Damped
Sinusoidal Process", IEEE Transactions on Signal Processing, November 1994.
- Guo, R., and Pandit, S.M., "Shape Recognition by DDS
Approach" Transactions of
NAMRI/SME, Vol. XXII, 1994, pp. 391-398.
- Pandit, S.M., Jordache, N. and Joshi, G.A., "Data
Dependent Systems Methodology for
Noise Insensitive Phase Unwrapping in Laser Interferometric Surface
Characterization"
Journal of the Optical Society of America A, Vol. 11, 1994, pp. 2584-2592.
- Pandit, S.M., Yao, Y.-X., and Hu, Z.-Q., "Dynamic
Properties of Rigid Body and Supports
from Vibration Measurements," ASME Journal of Vibration and Acoustics,
Vol. 116, 1994,
pp. 269-274.
- Yao, Y.-X., and Pandit, S.M., "Cramer-Rao Bound for a
Damped Sinusoidal Process,"
IEEE Transactions on Signal Processing, Vol. 43, No.4, 1995, pp. 878-885.
- Pandit, S.M., Paul, D., and Roth, J.T., "Tool Breakage
Detection in End-Milling: A DDS
Approach", Transactions of the NAMRI/SME, Vol. XXIII, 1995, pp. 261-266.