Inserting Batteries
The first step is putting batteries into the camera.
Please follow the procedure below:
- Turn Off the Camera
Turn the mode dial to the
OFF position.
Turn the mode dial to OFF
- Open the Battery Cover
Turn the camera upside down. If the camera is on a tripod,
detach the tripod before installing batteries because the tripod
blocks the battery bay. Slide the latch to the open position
to open the battery bay door (see the figure below).
Open the battery cover
- Insert Batteries
Insert the batteries with the positive (+) and negative (-) poles
aligned as show in the diagram at the entrance to the battery
bay (see the figure below).
Insert batteries
- Close the Battery Cover
Close the cover, and slide the latch back to lock the cover.
Since digital cameras are very power consuming, instead of four batteries
you might want to consider the use of external powerpacks or Nikon's EH-31
AC Adapter. Note that 950's AC Adapter EH-30
be used with 990. To use
external power, flip open the plastic cover adjacent to the Nikon 990 label as shown
in the left figure below. Plug the core from an external powerpack or
from the EH-31 AC Adapter into the connector (right figure below), and then
you can operate the camera as usual.