# Makefile.in generated by automake 1.10.2 from Makefile.am. # rdft/scalar/r2r/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # This Makefile.am specifies a set of codelets, efficient transforms # of small sizes, that are used as building blocks (kernels) by FFTW # to build up large transforms, as well as the options for generating # and compiling them. # You can customize FFTW for special needs, e.g. to handle certain # sizes more efficiently, by adding new codelets to the lists of those # included by default. If you change the list of codelets, any new # ones you added will be automatically generated when you run the # bootstrap script (see "Generating your own code" in the FFTW # manual). # -*- makefile -*- # This file contains special make rules to generate codelets. # Most of this file requires GNU make . pkgdatadir = $(datadir)/fftw pkglibdir = $(libdir)/fftw pkgincludedir = $(includedir)/fftw am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i686-pc-linux-gnu host_triplet = i686-pc-linux-gnu DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/support/Makefile.codelets subdir = rdft/scalar/r2r ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_mpi.m4 \ $(top_srcdir)/m4/acx_pthread.m4 \ $(top_srcdir)/m4/ax_cc_maxopt.m4 \ $(top_srcdir)/m4/ax_check_compiler_flags.m4 \ $(top_srcdir)/m4/ax_compiler_vendor.m4 \ $(top_srcdir)/m4/ax_gcc_aligns_stack.m4 \ $(top_srcdir)/m4/ax_gcc_archflag.m4 \ $(top_srcdir)/m4/ax_gcc_version.m4 \ $(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \ $(top_srcdir)/m4/ax_openmp.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ocaml.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) librdft_scalar_r2r_la_LIBADD = am__objects_1 = am__objects_2 = e01_8.lo am__objects_3 = e10_8.lo am__objects_4 = $(am__objects_1) $(am__objects_2) $(am__objects_3) \ $(am__objects_1) $(am__objects_1) $(am__objects_1) \ $(am__objects_1) $(am__objects_1) $(am__objects_1) am__objects_5 = codlist.lo am__objects_6 = $(am__objects_4) $(am__objects_5) am_librdft_scalar_r2r_la_OBJECTS = $(am__objects_6) librdft_scalar_r2r_la_OBJECTS = $(am_librdft_scalar_r2r_la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(librdft_scalar_r2r_la_SOURCES) DIST_SOURCES = $(librdft_scalar_r2r_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/faculty/struther/Desktop/5903/fftw-3.2.2/missing --run aclocal-1.10 ALLOCA = AMTAR = ${SHELL} /home/faculty/struther/Desktop/5903/fftw-3.2.2/missing --run tar AR = ar AS = as AUTOCONF = ${SHELL} /home/faculty/struther/Desktop/5903/fftw-3.2.2/missing --run autoconf AUTOHEADER = ${SHELL} /home/faculty/struther/Desktop/5903/fftw-3.2.2/missing --run autoheader AUTOMAKE = ${SHELL} /home/faculty/struther/Desktop/5903/fftw-3.2.2/missing --run automake-1.10 AWK = gawk CC = gcc -std=gnu99 CCDEPMODE = depmode=gcc3 CFLAGS = -O3 -fomit-frame-pointer -malign-double -fstrict-aliasing -ffast-math -march=native CODELET_OPTIM = -O -fno-schedule-insns -fno-web -fno-loop-optimize --param inline-unit-growth=1000 --param large-function-growth=1000 CPP = gcc -std=gnu99 -E CPPFLAGS = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = dlltool DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = F77 = f77 FFLAGS = -g FGREP = /bin/grep -F FLIBS = -lm -R/opt/sun/sunstudio12/lib:/opt/sun/sunstudio12/lib:/opt/sun/lib/rtlibs:/opt/sun/lib/rtlibs -L/opt/sun/sunstudio12/lib -L/opt/sun/sunstudio12/rtlibs -L/opt/sun/sunstudio12/prod/lib -L/lib -L/usr/lib -lfui -lfai -lfsu -lmtsk -lpthread /opt/sun/sunstudio12/prod/lib/libc_supp.a GREP = /bin/grep INSTALL = /usr/bin/install -c INSTALLED_OCAMLC = /usr/local/bin/ocamlc INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /usr/bin/ld LDFLAGS = LIBOBJS = LIBS = -lm LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = MAINT = # MAKEINFO = ${SHELL} /home/faculty/struther/Desktop/5903/fftw-3.2.2/missing --run makeinfo MKDIR_P = /bin/mkdir -p MPICC = MPILIBS = MPIRUN = NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJEXT = o OCAMLC = OCAMLCFLAGS = OCAMLDEFS = OCAMLDEP = OCAMLLDFLAGS = OCAMLOPT = OCAMLOPTCFLAGS = OPENMP_CFLAGS = OTOOL = OTOOL64 = PACKAGE = fftw PACKAGE_BUGREPORT = fftw@fftw.org PACKAGE_NAME = fftw PACKAGE_STRING = fftw 3.2.2 PACKAGE_TARNAME = fftw PACKAGE_VERSION = 3.2.2 PATH_SEPARATOR = : POW_LIB = PRECISION = d PREC_SUFFIX = PRTDIAG = PTHREAD_CC = PTHREAD_CFLAGS = PTHREAD_LIBS = RANLIB = ranlib SED = /bin/sed SET_MAKE = SHARED_VERSION_INFO = 5:4:2 SHELL = /bin/sh SIMD_CFLAGS = STRIP = strip TARGET_OCAMLBIN = /usr/local/bin TARGET_OCAMLLIB = /usr/local/lib/fftw TARGET_OCAMLRUN = /usr/local/bin/ocamlrun THREADLIBS = VERSION = 3.2.2 abs_builddir = /home/faculty/struther/Desktop/5903/fftw-3.2.2/rdft/scalar/r2r abs_srcdir = /home/faculty/struther/Desktop/5903/fftw-3.2.2/rdft/scalar/r2r abs_top_builddir = /home/faculty/struther/Desktop/5903/fftw-3.2.2 abs_top_srcdir = /home/faculty/struther/Desktop/5903/fftw-3.2.2 ac_ct_CC = gcc ac_ct_DUMPBIN = ac_ct_F77 = f77 acx_pthread_config = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i686-pc-linux-gnu build_alias = build_cpu = i686 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = i686-pc-linux-gnu host_alias = host_cpu = i686 host_os = linux-gnu host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = $(SHELL) /home/faculty/struther/Desktop/5903/fftw-3.2.2/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var lt_ECHO = echo mandir = ${datarootdir}/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr/local program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = top_build_prefix = ../../../ top_builddir = ../../.. top_srcdir = ../../.. ########################################################################### AM_CPPFLAGS = -I$(top_srcdir)/kernel -I$(top_srcdir)/rdft \ -I$(top_srcdir)/rdft/scalar noinst_LTLIBRARIES = librdft_scalar_r2r.la ########################################################################### # The following lines specify the REDFT/RODFT/DHT sizes for which to generate # specialized codelets. Currently, only REDFT01/10 of size 8 (used in JPEG). # e_ is a hard-coded REDFT FFT (DCT) of size E00 = # e00_2.c e00_3.c e00_4.c e00_5.c e00_6.c e00_7.c e00_8.c E01 = e01_8.c # e01_2.c e01_3.c e01_4.c e01_5.c e01_6.c e01_7.c E10 = e10_8.c # e10_2.c e10_3.c e10_4.c e10_5.c e10_6.c e10_7.c E11 = # e11_2.c e11_3.c e11_4.c e11_5.c e11_6.c e11_7.c e11_8.c # o_ is a hard-coded RODFT FFT (DST) of size O00 = # o00_2.c o00_3.c o00_4.c o00_5.c o00_6.c o00_7.c o00_8.c O01 = # o01_2.c o01_3.c o01_4.c o01_5.c o01_6.c o01_7.c o01_8.c O10 = # o10_2.c o10_3.c o10_4.c o10_5.c o10_6.c o10_7.c o10_8.c O11 = # o11_2.c o11_3.c o11_4.c o11_5.c o11_6.c o11_7.c o11_8.c # dht_ is a hard-coded DHT of size DHT = # dht_2.c dht_3.c dht_4.c dht_5.c dht_6.c dht_7.c dht_8.c ########################################################################### ALL_CODELETS = $(E00) $(E01) $(E10) $(E11) $(O00) $(O01) $(O10) $(O11) $(DHT) BUILT_SOURCES = $(ALL_CODELETS) $(CODLIST) librdft_scalar_r2r_la_SOURCES = $(BUILT_SOURCES) SOLVTAB_NAME = X(solvtab_rdft_r2r) COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(CODELET_OPTIM) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) $(CODELET_OPTIM) CODLIST = codlist.c CODELET_NAME = codelet_ #INDENT = indent -kr -cs -i5 -l800 -fca -nfc1 -sc -sob -cli4 -TR -Tplanner -TV #TWOVERS = sh ${top_srcdir}/support/twovers.sh #GENFFTDIR = ${top_builddir}/genfft #GEN_NOTW = ${GENFFTDIR}/gen_notw #GEN_NOTW_C = ${GENFFTDIR}/gen_notw_c #GEN_TWIDDLE = ${GENFFTDIR}/gen_twiddle #GEN_TWIDDLE_C = ${GENFFTDIR}/gen_twiddle_c #GEN_TWIDSQ = ${GENFFTDIR}/gen_twidsq #GEN_TWIDSQ_C = ${GENFFTDIR}/gen_twidsq_c #GEN_R2CF = ${GENFFTDIR}/gen_r2cf #GEN_R2CB = ${GENFFTDIR}/gen_r2cb #GEN_HC2HC = ${GENFFTDIR}/gen_hc2hc #GEN_HC2C = ${GENFFTDIR}/gen_hc2c #GEN_HC2CDFT = ${GENFFTDIR}/gen_hc2cdft #GEN_HC2CDFT_C = ${GENFFTDIR}/gen_hc2cdft_c #GEN_R2R = ${GENFFTDIR}/gen_r2r #PRELUDE_DFT = ${top_srcdir}/support/codelet_prelude.dft #PRELUDE_RDFT = ${top_srcdir}/support/codelet_prelude.rdft #ADD_DATE = sed -e s/@DATE@/"`date`"/ #COPYRIGHT = ${top_srcdir}/COPYRIGHT #CODELET_DEPS = $(COPYRIGHT) $(PRELUDE) #PRELUDE_COMMANDS_DFT = cat $(COPYRIGHT) $(PRELUDE_DFT) #PRELUDE_COMMANDS_RDFT = cat $(COPYRIGHT) $(PRELUDE_RDFT) #FLAGS_COMMON = -compact -variables 4 #DFT_FLAGS_COMMON = $(FLAGS_COMMON) -pipeline-latency 4 #RDFT_FLAGS_COMMON = $(FLAGS_COMMON) -pipeline-latency 4 # special rules for regenerating codelets. #FLAGS_E00 = $(RDFT_FLAGS_COMMON) #FLAGS_E01 = $(RDFT_FLAGS_COMMON) #FLAGS_E10 = $(RDFT_FLAGS_COMMON) #FLAGS_E11 = $(RDFT_FLAGS_COMMON) #FLAGS_O00 = $(RDFT_FLAGS_COMMON) #FLAGS_O01 = $(RDFT_FLAGS_COMMON) #FLAGS_O10 = $(RDFT_FLAGS_COMMON) #FLAGS_O11 = $(RDFT_FLAGS_COMMON) #FLAGS_DHT = $(RDFT_FLAGS_COMMON) all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/support/Makefile.codelets $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rdft/scalar/r2r/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu rdft/scalar/r2r/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done librdft_scalar_r2r.la: $(librdft_scalar_r2r_la_OBJECTS) $(librdft_scalar_r2r_la_DEPENDENCIES) $(LINK) $(librdft_scalar_r2r_la_OBJECTS) $(librdft_scalar_r2r_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c include ./$(DEPDIR)/codlist.Plo include ./$(DEPDIR)/e01_8.Plo include ./$(DEPDIR)/e10_8.Plo .c.o: $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po # source='$<' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(COMPILE) -c $< .c.obj: $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po # source='$<' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo # source='$<' object='$@' libtool=yes \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am all-am: Makefile $(LTLIBRARIES) installdirs: install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-exec-am: install-html: install-html-am install-info: install-info-am install-man: install-pdf: install-pdf-am install-ps: install-ps-am installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic \ maintainer-clean-local mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am # rule to build codlist $(CODLIST): Makefile ( \ echo "#include \"ifftw.h\""; \ echo; \ for i in $(ALL_CODELETS) NIL; do \ if test "$$i" != NIL; then \ j=`basename $$i | sed -e 's/[.][cS]$$//g'`; \ echo "extern void X($(CODELET_NAME)$$j)(planner *);"; \ fi \ done; \ echo; \ echo; \ echo "extern const solvtab $(SOLVTAB_NAME);"; \ echo "const solvtab $(SOLVTAB_NAME) = {"; \ for i in $(ALL_CODELETS) NIL; do \ if test "$$i" != NIL; then \ j=`basename $$i | sed -e 's/[.][cS]$$//g'`; \ echo " SOLVTAB(X($(CODELET_NAME)$$j)),"; \ fi \ done; \ echo " SOLVTAB_END"; \ echo "};"; \ ) >$@ # only delete codlist.c in maintainer-mode, since it is included in the dist # FIXME: is there a way to delete in 'make clean' only when builddir != srcdir? maintainer-clean-local: rm -f $(CODLIST) # cancel the hideous builtin rules that cause an infinite loop #%: %.o #%: %.s #%: %.c #%: %.S #e00_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_E00) -redft00 -n $* -name e00_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #e01_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_E01) -redft01 -n $* -name e01_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #e10_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_E10) -redft10 -n $* -name e10_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #e11_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_E11) -redft11 -n $* -name e11_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #o00_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_O00) -rodft00 -n $* -name o00_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #o01_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_O01) -rodft01 -n $* -name o01_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #o10_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_O10) -rodft10 -n $* -name o10_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #o11_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_O11) -rodft11 -n $* -name o11_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ #dht_%.c: $(CODELET_DEPS) $(GEN_R2R) # ($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2R) $(FLAGS_DHT) -dht -sign 1 -n $* -name dht_$* -include "r2r.h") | $(ADD_DATE) | $(INDENT) >$@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: