• Associate Editor, ASME Journal of Dynamic Systems, Measurement, and Control, 2017 –
• Associate Editor, Int. Journal of Powertrains (Inderscience Publishers), 2014 –
• Guest Editor for Special Issue on " Vehicle Powertrain Research ", Int. Journal of Powertrains, 2016 – 2017
• Editorial Board - Associate Editor, Proceedings of 2014 American Control Conference
• Editorial Board - Associate Editor, Proceedings of 2014 ASME Dynamic Systems Control Conference

     

• Elected Chair of ASME-DSC Energy Systems Technical Committee, 2018 -
• Elected Vice Chair of ASME-DSC Automotive and Transportation Systems Technical Committee, 2018 -
• Member of ASME-DSC Mechatronic Technical Committee, 2011 -
• Member of IEEE CSS Technical Committee on Automotive Controls, 2015 -
• Elected Vice Chair (2016-2018), Secretory (2014-2016), Publicity Chair (2012-2014), Fuels & Combustion thrust area leader (2012-2013) in ASME-DSC Energy Systems Technical Committee
• Elected Secretory (2016-2018), lead invited session organizer (2014-2016) of ASME-DSC Automotive and Transportation Systems Technical Committee

   

• Co-chair of the session on " Homogenous Charge Compression Ignition – Part I ", 2018 SAE World Congress, Apr. 2018, Detroit, MI, USA.
• Co-chair of the session on " Control of Smart Buildings and Microgrids ", 2017 ASME Dynamic Systems Control Conference, Oct. 2017, Tysons Corner, VA, USA.
• Co-chair of the session on " Sliding Mode Control ", 2017 ASME Dynamic Systems Control Conference, Oct. 2017, Tysons Corner, VA, USA.
• Co-chair of the session on " Control and Energy Management of Building Systems ", 2017 American Control Conference, May 2017, Seattle, WA, USA.
• Co-chair of the session on " IC Engine Modeling and Control ", 2017 American Control Conference, May 2017, Seattle, WA, USA.
• Co-chair of the session on " Homogenous Charge Compression Ignition – Part I ", 2017 SAE World Congress, Apr. 2017, Detroit, MI, USA.
• Chair of the session on " Modeling and Control of Automotive Systems ", 2016 ASME Dynamic System Controls Conference, Oct. 2016, Minneapolis, MN, USA.
• Chair of the session on " Modeling and Control of Combustion Engines ", 2016 ASME Dynamic System Controls Conference, Oct. 2016, Minneapolis, MN, USA.
• Co-chair of the session on " Homogenous Charge Compression Ignition – Part I ", 2016 SAE World Congress, Apr. 2016, Detroit, MI, USA.
• Chair of the session on " Homogenous Charge Compression Ignition – Part II ", 2016 SAE World Congress, Apr. 2016, Detroit, MI, USA.
• Chair of the session on " Modeling and Control of Electric and Hybrid Vehicles ", 2015 ASME Dynamic System Controls Conference, Oct. 2015, Columbus, OH, USA.
• Chair of the session on " Estimation and Control of Advanced Internal Combustion Engines ", 2015 American Control Conference, Jul. 2015, Chicago, IL, USA.
• Co-chair of the session on " Control of Autonomous Vehicles and Connected Vehicles ", 2015 American Control Conference, Jul. 2015, Chicago, IL, USA.
• Co-chair of the session on " Control-Oriented Modeling of Advanced Internal Combustion Engines ", 2015 American Control Conference, Jul. 2015, Chicago, IL, USA.
• Co-chair of the session on " Modeling and Control of IC Engines ", 2014 ASME Dynamic System Control Conference, Oct. 2014, San Antonio, TX, USA.
• Co-chair of the session on " Dynamic Systems Modeling for the Design and Optimization of Vehicle Systems ", 2014 ASME Dynamic System Control Conference, Oct. 2014, San Antonio, TX, USA.
• Co-chair of the session on " Energy Storage: Transportation Applications ", 2014 ASME Dynamic System Control Conference, Oct. 2014, San Antonio, TX, USA.
• Chair of the session on " Modeling and Control of Advanced IC Engine Combustion ", 2014 American Control Conference, Jun. 2014, Portland, OR, USA.
• Co-chair of the session on " Model-based Estimation for Control and Diagnosis of Automotive systems ", 2014 American Control Conference, Jun. 2014, Portland, OR, USA.
• Co-chair of the session on " Modeling and Control of Advanced Transportation Systems ", 2014 American Control Conference, Jun. 2014, Portland, OR, USA.
• Chair of the session on "Control of Advanced Combustion Engines", 2013 ASME Dynamic System Control Conference, Oct. 2013, Palo Alto, CA, USA.
• Chair of the session on "Control Design Methods for Advanced Powertrain Systems and components", 2013 ASME Dynamic System Control Conference, Oct. 2013, Palo Alto, CA, USA.
• Co-chair of the session on "Automotive Control Systems", 2013 ASME Dynamic System Control Conference, Oct. 2013, Palo Alto, CA, USA.
• Chair of the session on "Modeling and Control of Advanced Combustion Systems", 2013 American Control Conference, Jun. 2013.
• Chair of the session on "Modeling, Estimation, and Control of Advanced Engine Sensing and Actuation", 2013 American Control Conference, Jun. 2013.
• Chair of the session on "Modeling and Model-Based Control of Advanced IC Engines", 2012 ASME Dynamic Systems and Control Conference, Oct. 2012.

back to top

• Led and co-organized an invited session in the area of modeling and management of power and energy systems for 2018 ASME Dynamic Systems and Control Conference.
• Co-organized two technical sessions in the area of combustion engines for 2018 SAE World Congress.
• Co-organized one technical invited session in the area of control of smart buildings and microgrids for 2017 ASME Dynamic Systems and Control Conference.
• Co-organized one industry special session in the area of control research perspective in Automotive Industry for 2017 ASME Dynamic Systems and Control Conference.
• Led and co-organized eight technical invited sessions in the area of automotive systems for 2017 American Control Conference.
• Co-organized one technical invited session in the area of building energy systems for 2017 American Control Conference.
• Co-organized two technical invited sessions in the area of combustion engines for 2017 SAE World Congress.
• Led and co-organized three technical invited sessions in the area of Automotive and Transportation Systems for 2016 ASME Dynamic Systems and Control Conference.
• Led and co-organized five technical invited sessions in the area of automotive systems for 2016 American Control Conference.
• Co-organized two technical invited sessions in the area of building energy systems for 2016 American Control Conference.
• Co-organized two technical sessions in the powertrain area for 2016 SAE World Congress.
• Led and co-organized three technical invited sessions in division of Automotive and Transportation Systems (ATS) for 2015 ASME Dynamic Systems and Control Conference.
• Co-organizd five technical invited sessions in division of Automotive and Transportation Systems (ATS) for 2015 American Control Conference.
• Co-organized two technical sessions in the area of HCCI engines for 2015 SAE World Congress.
• Co-organized four technical invited sessions in divisions of Automotive and Transportation Systems (ATS) and Energy Systems (ES) for 2014 ASME Dynamic Systems and Control Conference.
• Co-organized seven technical invited sessions in divisions of Automotive and Transportation Systems (ATS) and Energy Systems (ES) for 2014 American Control Conference.
• Co-organized six technical invited sessions in divisions of Automotive and Transportation Systems (ATS) and Energy Systems (ES) for 2013 ASME Dynamic Systems and Control Conference, 2013
• Co-organized five technical invited sessions in divisions of Automotive and Transportation Systems (ATS) and Energy Systems (ES) for 2013 American Control Conference, 2013.
• Co-organized three Automotive and Transportation Systems (ATS) technical sessions in 2012 ASME Dynamic Systems and Control Conference, 2012.
• Co-chaired and coordinated 2nd Annual Mechanical Engineering Graduate Symposium, over 180 participants from 8 different departments, University of Alberta, March 6, 2008.
• Organized and coordinated a series of teaching seminars entitled " What Contributes to Successful Teaching in Engineering " in the Faculty of Engineering, 2007-2008.
• Member of organizing team for Combustion Institute/Canadian Section (CI/CS) spring technical conference, Banff, Alberta, Canada, May 14-16, 2007.

back to top

Reviewing/Refereeing Activities

• US Department of Energy (DOE), 2013, 2014, 2015, 2017, 2018
• US National Science Foundation (NSF), 2015, 2016
• Poland National Science Centre (SHENG), 2018
• Dutch Technology Foundation STW - NWO (Netherlands), 2016
• IdEx Bordeaux (France), 2015
• Luxembourg National Research Fund (Germany), 2014
• Croatian Science Foundation (CSF), 2012
• Shota Rustaveli National Science Foundation (USA), 2012

• Automatica (Elsevier)
• Annual Reviews in Control (Elsevier)
• Journal of Dynamic Systems, Measurement, and Control (ASME)
• Applied Energy (Elsevier)
• Journal of the Energy Institute (Elsevier)
• Mechatronics (Elsevier)
• Int. Journal of Robust and Nonlinear Control (Wiley)
• Control Engineering Practice (Elsevier)
• IEEE/ASME Transactions on Mechatronics
• IEEE Transactions on Control Systems Technology
• IEEE Transactions on Intelligent Transportation Systems
• IEEE Transactions on Transportation Electrification
• Journal of Mechanical Engineering Science - Proc. of IMechE, Part C (SAGE)
• Int. Journal of Engine Research (SAGE)
• Journal of Automobile Engineering - Proc. of IMechE, Part D (SAGE)
• Int. Journal of Powertrains (Inderscience)
• Fuel (Elsevier)
• Journal of Petroleum Technology and Alternative Fuels (AcademicJournals)
• Journal of Petroleum Gas and Engineering (AcademicJournals)
• Combustion Science and Technology (Taylor & Francis)
• Journal of Heat Transfer Research (BegellHouse Inc.)
• Int. Journal of Vehicle Noise and Vibration (InderScience Publishers)

• ASME: Internal Combustion Engine Conference; Dynamic Systems and Control Conference (DSCC)
• SAE: World Congress; Powertrains, Fuels and Lubricants Conference
• IEEE/IFAC: American Control Conference; IFAC World Congress; European Control Conference; Multi Conference on Systems and Control

back to top

• M. Shahbakhti, H. Fathy, workshop (including 16 invited speakers) on “Connected and Automated Vehicles (CAVs)”, 2018 ASME Dynamic System and Control, Atlanta, GA, USA, Sep. 30, 2018.
• A. Scacchioli, M. Shahbakhti, workshop (including 6 invited speakers) on “From Data to Models and Decisions in Engineering Systems”, 2018 ASME Dynamic System and Control, Atlanta, GA, USA, Sep. 30, 2018.
• M. Shahbakhti, K. Hedrick, K. Butts, half-day workshop on “Methods of Easily Verifiable Control Design”, American Control Conference, Boston, MA, USA, Jul. 5, 2016.
• J. Naber, J. Worm, M. Shahbakhti, 4-day workshop on " Torque-based Control of SI Engines ", DENSO Inc., Southfield, MI, USA, Feb. 5-8, 2013.
• M. Shahbakhti, N. Yusefi, " Automotive Engines and Power Transmission Systems ", Let's Talk Science workshop, Edmonton, Canada, March 14, 2008.
• M. Shahbakhti, N. Yusefi, " Vortex in Rotational Flows ", Let's Talk Science workshop, Edmonton, Canada, March 14, 2008.
• M. Shahbakhti, " HCCI Engines and Advanced Methods to Improve Emissions of Motor Vehicles ", 81th Annual GETCA Convention (Greater Edmonton Teachers Convention), Shaw conference center, Edmonton, Canada, March 1-2, 2007.
• M. Shahbakhti, " Vehicles’ Emissions ", Heritage Youth Researcher Summer (HYRS) Teachers Workshop, University of Alberta, July 25-26, 2006.
• M. Shahbakhti, " Engineering Solutions for Automotive Emissions ", HYRS Teachers Workshop, University of Alberta, August 8-10, 2005.
• M. Shahbakhti, " Methods to Reduce Emissions of Vehicles during Cold Start and Warm up Conditions ", 3rd International Conference on Internal Combustion Engines (ICICE), Tehran, Iran, February 19, 2004.

back to top

Community Service

• Led and co-organized a half-day workshop on “Controls and Robotics” in Michigan Tech’s Summer Youth Program -- ME: Design the Future, high school students in grades 9-12, Jul. 27, 2016.
• Judge in Western UP Science Fair, Houghton, MI, March 23, 2015
• Judge in Canada-Wide Youth Science Fair, Ottawa, May 10-18, 2008
• Member of University of Alberta Student Life Advisory Committee for graduate students, 2008-2009
• Student representative of the University of Alberta graduate students in the Council of Faculty of Graduate Studies and Research (FGSR), 2007-2009
• Member of University of Alberta Grant Selection Committee for graduate students, 2007-2008
• Elected Vice-President Events of Mechanical Engineering Graduate Students Association (MEGSA), University of Alberta, 2007-2008
• One of the main coordinators for 2008 GSA (Graduate Students Association) Universal Orientation for over 400 new graduate students recruited to the University of Alberta in September 2008
• Judge in Edmonton Regional Science Fair, Northern Alberta Institute of Technology (NAIT), Edmonton, April 9, 2007

back to top